ISS 2018 Program

Poster Sessions WB -December 12

Dec. 12 (Wed.) Wires and Bulk Multi-Purpose Hall

PLD, films

Chairperson: Toshiya Doi (Kyoto University)

WBP1-1 16:00–18:00

Improvement of anisotropy of superconducting properties in Y-rich YBa2Cu3Oy film in magnetic fields

*Motoki Shiomi1, Yusuke Ichino1, Yuji Tsuchiya1, Ataru Ichinose2, Yutaka Yoshida1

Nagoya Univ.1
CRIEPI2

WBP1-2 16:00–18:00

Deposition of Ag thin film by reel-to-reel pulsed laser deposition system

*Jin Matsuzaka1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1

Nagoya University1

WBP1-3 16:00–18:00

Effects of Sm1+xBa2-xCu3Oy films with non-stoichiometric composition fabricated by combinatorial pulsed laser deposition method on the superconducting properties

*Gohki MURASE1, Yusuke ICHINO1, Yuji TSUCHIYA1, Yutaka YOSHIDA1

Dept of Electrical Engineering, Nagoya Univ.1

WBP1-4 16:00–18:00

Evaluation of superconducting properties for YBa2Cu3Oy coated conductors fabricated by self-heating technique in Pulsed Laser Deposition method

*Sato Wataru1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1

Department of Electrical Engineering, Nagoya University, Japan1

WBP1-5 16:00–18:00

Liquid phase stabilization and superconducting properties by adding Ag to SmBa2Cu3Oy coated conductors fabricated by Vapor-Liquid-Solid growth technique

*Kento Yasuda1, Tomohiro Ito1, Yuji Tsuchiya1, Yusuke Ichino1, Ataru Ichinose2, Yutaka Yoshida1

Department of Electrical Engineering, Nagoya University, Japan1
Central Research Institute of Electric Power Industry, Japan2

WBP1-6 16:00–18:00

Crystallinities and superconducting properties of SmBa2Cu3Oy coated conductors using Vapor-Liquid-Solid growth techniques

*Tomohiro Ito1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1

Nagoya Univ.1

APC

Chairperson: Kaname Matsumoto (Kyushu Institute of Technology)

WBP2-1 16:00–18:00

The Influence of BaHfO3 nanorods on Jc in the longitudinal magnetic field for PLD EuBa2Cu3Oy coated conductors

*Jun Nishimura1, Kenji Miyata1, Kota Hirai1, Masashi Miura1, Akira Ibi2, Teruo Izumi2, Masaru Kiuchi3, Teruo Matsushita3

Seikei University Japan1
AIST Japan2
Kyushu Institute of Technology Japan3

WBP2-2 16:00–18:00

Influence of BaHfO3 nanorods on in-field Jc in EuBa2Cu3Oy coated conductors produced by PLD

*Shuji Anno1, Kenji Miyata1, Masashi Miura1, Akira Ibi2, Teruo Izumi2

Seikei University, Japan1
AIST, Japan2

WBP2-3 16:00–18:00

Improved pinning in Zn doped YBa2Cu3O6+δ films

*Kai Ackermann1, Jens Hänisch1, Bernhard Holzapfel1

Karlsruhe Institute Of Technology, Germany1

WBP2-4 16:00–18:00

In-Plane Anisotropy of Critical Current Density in BaTbO3-doped SmBa2Cu3Oy Films

*Hiroki Kato1, Yuji Tsuchiya1, Yusuke Ichino1, Ataru Ichinose2, Yutaka Yoshida1

Nagoya University, Japan1
Central Research Institute of Electric Power Industry, Japan2

WBP2-5 16:00–18:00

Improvement of in-field performance for REBCO with heavily doped BMO coated conductors by PLD method

*Akira Ibi1, Takato Machi1, Koichi Nakaoka1, Michio Sato1, Teruo Izumi1, Jun Nishimura2, Masashi Miura2, Daisaku Yokoe3, Tomohiro Kato3, Takeharu Kato3, Tsukasa Hirayama3

National Institute of Advanced Industrial Science and Technology (AIST)1
Seikei University2
Nanostructures Research Lab. , Japan Fine Ceramics Center (JFCC)3

WBP2-6 16:00–18:00

Development of high uniformity multi-filamentary structure long REBCO with BMO coated conductors by plane-plume PLD method

*Akira Ibi1, Takato Machi1, Koichi Nakaoka1, Michio Sato1, Teruo Izumi1, Kohei Higashikawa2, Takanobu Kiss2

National Institute of Advanced Industrial Science and Technology (AIST)1
Dept. of Electrical Engineering, Kyushu University2

MOD

Chairperson: Takato Machi (AIST)

WBP3-1 16:00–18:00

The Effect of the Ba/Y ratio on in-field Jc in TFA-MOD (Y0.77,Gd0.23)Ba2Cu3Oy+BaHfO3 CCs

*Kazuki Shimizu1, Junya Kawanami1, Masashi Miura1, Koichi Nakaoka2, Izumi Teruo2

Seikei University1
AIST2

WBP3-2 16:00–18:00

The effect of BaZrO3 nanoparticles on critical current density in TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy films on CeO2 buffered R-Al2O3 substrates

*Yoshinori Kamada1, Ryota Oku1, Keita Sakuma1, Masashi Miura1

Seikei University1

WBP3-3 16:00–18:00

The influence of an intermediate heat treatment temperature on the in-field Jc of BaHfO3 doped TFA-MOD (Y0.77,Gd0.23)Ba2Cu3Oy wires

*Junya Kawanami1, Kazuki Shimizu1, Masashi Miura1, Ryuji Yoshida2, Takeharu Kato2, Koichi Nakaoka3, Teruo Izumi3

Seikei University, Japan1
Nanostructures Research Laboratory, Japan2
AIST, Japan3

WBP3-4 16:00–18:00

Influence of the twin boundaries on the in-field Jc in BaZrO3 doped TFA-MOD (Y0.77Gd0.23)Ba2Cu3Oy CCs

*Kenji Miyata1, Ryota Oku1, Masashi Miura1, Masaru Kiuchi2, Teruo Matsushita2

Seikei University Tokyo, Japan1
Kyushu Institute of Technology, Japan2

WBP3-5 16:00–18:00

Optimization of interim heat treatment condition on TFA-MOD process for fabrication of Y0.77Gd0.23Ba2Cu3Oy coated conductors with BaHfO3

*Koichi Nakaoka1, Ryuji Yoshida2, Michio Sato1, Akira Ibi1, Takato Machi1, Takeharu Kato2, Teruo Izumi1

National Institute of Advanced Industrial Science and Technology (AIST)1
Nanostructures Research Lab., Japan Fine Ceramics Center (JFCC)2

WBP3-6 16:00–18:00

Superconducting properties of (Y1-xEux)Ba2Cu3Oy coated conductors by TFA-MOD process

*Michio Sato1, Koichi Nakaoka1, Akira Ibi1, Takato Machi1, Teruo Izumi1

National Institute of Advanced Industrial Science and Technology1

WBP3-7 16:00–18:00

Film thickness dependence of critical current density in (Y,Gd)BaCuO+BaZrO3 nanoparticle CCs

*Go Tsuchiya1, Kota Hirai1, Masashi Miura1, Masaru Kiuchi2, Teruo Matsushita2

Seikei University1
Kyusyu Institute of Technology2

WBP3-8 16:00–18:00

The longitudinal magnetic field dependence of critical current density in multilayered TFA-MOD REBa2Cu3Oy Coated Conductors

*Keiichi Sato1, Jun Nishimura1, Kota Hirai1, Keita Sakuma1, Masashi Miura1, Masaru Kiuchi2, Teruo Matsushita2

Seikei University, Japan1
Kyushu Institute of Technology, Japan2

WBP3-9 16:00–18:00

Comparison of different CSD-grown REBCO (RE = Yb, Er, Ho, Y, Dy, Gd, Sm, Nd) compounds with respect to applicability as Coated Conductors

*Manuela Erbe1, Pablo Cayado1, Wolfram Freitag1, Jens Haenisch1, Bernhard Holzapfel1

Karlsruhe Institute Of Technology, Germany1

WBP3-10 16:00–18:00

Dominate Effect of Fluorine on Decomposition Phase Evolution towards High Performnce GdBCO Films

*Lihua Jin1, Yang Bai1, Chengshan Li1, Jianqing Feng1, Pingxiang Zhang1

Northwest Institute for Nonferrous Metal Research1

WBP3-11 16:00–18:00

Enhancement of critical current densities for Hf and La doped Gd123 films fabricated by fluorine-free MOD method

Joichiro Fukui1, Takumi Takahashi1, Osuke Miura1, Ryusuke Kita2

Dept. of Electrical Engineering and Computer Science, Tokyo Metropolitan University, Japan1
Electrical and Electronic Engineering, Shizuoka University, Japan2

WBP3-12 16:00–18:00

Effect of Zirconium Doping Using a New Metal-organic Material on the Fabrication of Fluorine-free MOD-GdBCO Films

*Koyuki Kosugi1, Ryusuke Kita1, Joichiro Fukui2, Osuke Miura2

Shizuoka University1
Tokyo Metropolitan University2

WBP3-13 16:00–18:00

Investigation of temperature and oxygen partial pressure diagram for LaBa2Cu3Oy film

*Tomohiro Miyajima1, Ryo Teranishi1, Yukio Sato1, Kenji Kaneko1

Kyushu University, Japan1

CC

Chairperson: Satoshi Awaji (Tohoku University)

WBP4-1 16:00–18:00

Electron Backscatter Diffraction Study of EuBa2Cu3Oy Coated Conductors Fabricated by Pulsed Laser Deposition

Daisaku Yokoe1, Ryuji Yoshida1, *Takeharu Kato1, Akira Ibi2, Teruo Izumi2, Tsukasa Hirayama1

Nanostructures Research Laboratory, Japan Fine Ceramics Center1
Dept. of Energy & Environment, National Inst. of Advanced Industrial Science & Technology2

WBP4-2 16:00–18:00

Fatigue Behaviors of Differently Stabilized REBCO Coated Conductor Tapes at 77 K

Mark Angelo Diaz1, Zherwinjay Bautista1, *Hyung-Seop Shin1

Dept. of Mechanical Design Engineering, Andong National University, Andong, Korea1

WBP4-3 16:00–18:00

Dependence of AC Loss in Stacked REBa2Cu3Oy Superconducting Tapes on the Interval among Tapes under Perpendicular Magnetic Field

*Hiromasa Sasa1, Goki Kawasaki1, Shun Miura1, Masataka Iwakuma1, Teruo Izumi2, Takato Machi2, Akira Ibi2

Institute of Superconductors Science and Systems, Kyushu University, Japan1
National Institute of Advanced Industrial Science and Technology, Japan2

WBP4-4 16:00–18:00

Electormagnetic coupling of multifilamentary helically-wound superconducting tapes in a rapidly swept magnetic field

*Yoichi Higashi1, Yasunori Mawatari1

National Institute of Advanced Industrial Science and Technology (AIST)1

WBP4-5 16:00–18:00

Fabrication of a Compact High-field Magnet by Coated Conductor Stacks

*Tomohiro Hashimoto1, Sunseng Pyon1, Yasuhiro Iijima2, Shiori Sugiura3, Sinya Uji3, Taichi Terashima3, Tsuyoshi Tamegai1

Department of Applied Physics, The University of Tokyo, Japan1
Fujikura Ltd., Japan2
Reserch Center for Functional Materials Quantum Transport Properties Group, National Institute for Materials Science, Japan3

WBP4-6 16:00–18:00

A study on the effect of slitting and packaging processes on the critical current of HTS tapes

Zhuyong Li1, *Yuqian Li1, Wenyi Li2, Zhijian Jin1, Zhiyong Hong1, Longbiao Wang1

Shanghai Jiao Tong University1
Inner Mongolia University of Technology1

WBP4-7 16:00–18:00

Influence of the contacting terminal on transport current distributions along the ReBCO tape

*Shinnosuke Matsunaga1, Tetsuhiro Obana1,2, Yoshiro Terazaki2, Nagato Yanagi1,2

SOKENDAI (The Graduate University for Advanced Studies)1
National Institute for Fusion Science2