ISS2019 WBP: Wires and Bulk -December 5
Dec. 5 (Thu.) Wires and Bulk First Exhibition Hall B
PLD
Chairperson: Takeharu Kato (Japan Fine Ceramics Center)
WBP5-111:00–13:00
Effects of growth temperature and laser repetition rate on the shape of nanorods in BaSnO3-doped SmBa2Cu3Oy films prepared by pulsed laser deposition method
*Takafumi Yamamoto1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Department of Electrical Engineering, Nagoya University, Japan1
WBP5-211:00–13:00
Thickening of YBa2Cu3Oy coated conductors fabricated by self-heating technique in Pulsed Laser Deposition method and evaluation of the superconducting properties
*Wataru Sato1, Yuji Tsuchiya1, Yusuke Ichino1, Ataru Ichinose2, Yutaka Yoshida1
Department of Electrical Engineering, Nagoya University, Japan1
Central Research Institute of Electric Power Industry, Japan2
WBP5-311:00–13:00
Deposition of thick superconducting YBCO films using the surface laser heating
*Jin Matsuzaka1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Nagoya University1
WBP5-411:00–13:00
Fabrication of BaTiO3/YBa2Cu3Oy Multi-layered Films for Superconducting Capacitors
*Yoshiyasu Moriguchi1, Yuji Tuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Nagoya Univ. Japan1
WBP5-511:00–13:00
The in-field Jc in RTR-PLD EuBa2Cu3Oy+BaHfO3 coated conductors
*Kenji Miyata1, Jun Nishimura1, Shuji Anno1, Masashi Miura1, Akira Ibi2, Teruo Izumi2
Seikei University, Japan1
AIST,Japan2
WBP5-611:00–13:00
Effect of laser energy and laser repetition frequency on BHO shape in PLD method
*Taku Hibino1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Department of Electrical Engineering, Nagoya University, Japan1
MOD
Chairperson: Ryo Teranishi (Kyushu University)
WBP6-111:00–13:00
Improvement of critical current densities for Hf, Ce and La doped Gd123 thin film fabricated by fluorine-free MOD method
*Taishi Hatano1, Joichiro Fukui1, Osuke Miura1, Ryusuke Kita2
Electrical Engineering and Computer Science, Tokyo Metropolitan University, Japan1
Electrical and Electronic Engineering, Shizuoka University, Japan2
WBP6-211:00–13:00
Film thickness dependence of in-field Jc in (Y,Gd)BaCuO+BaMO3 (M=Zr, Hf) nanoparticle CCs
*Go Tsuchiya1, Junya Kawanami1, Masashi Miura1, Masaru Kiuchi2, Teruo Matsushita2
Seikei University, Japan1
Kyushu Institute of Technology, Japan2
WBP6-311:00–13:00
The influence of carrier density on the in-field Jc of (Y,Gd)BCO+BZO CCs
*Junya Ohta1, Kazuki Shimizu1, Masashi Miura1, Akira Ibi2, Koichi Nakaoka2, Teruo Izumi2
Seikei University, Japan1
National Institute of advanced Industrial Science and Technology, Japan2
WBP6-411:00–13:00
Control of residual oxide compounds on the surface of REBCO layer in TFA-MOD method
*Koichi Nakaoka1, Akira Ibi1, Takato Machi1, Yukie Usui1, Teruo Izumi1, Tasuku Kitamura2, Yuji Aoki2, Yasuo Takahashi2, Michio Sato2, Takayo Hasegawa3
National Institute of Advanced Industrial Science and Technology1
SWCC Showa Cable System Co., Ltd.2
SWCC Showa Holdings Co., Ltd.3
Flux Pinning and Jc
Chairperson: Kaname Matsumoto (Kyushu Institute of Technology)
WBP7-111:00–13:00
Competing flux pinning of columnar defects in different directions for high-Tc superconductors
*Tetsuro Sueyoshi1, Masahiro Irie1, Ryusei Enokihata1, Yuka Hidaka1, Takanori Fujiyoshi1, Akane Kitamura2, Yasuki Okuno2, Norito Ishikawa2
Kumamoto University, Japan1
Japan Atomic Energy Agency, Japan2
WBP7-211:00–13:00
TDGL Simulation of Critical Current Density introducing z axis Anisotropy γz
*Rina Yonezuka1, Yusei Hamada1, Kazunori Kamiji1, Edmund Soji Otabe1, Yasunori Mawatari2, Tetsuya Matsuno3
Kyushu Institute of Technology, Japan1
National Institute of Advanced Industrial Science and Technology, Japan2
National Institute of Technology Ariake College, Japan3
WBP7-311:00–13:00
JC control by hybrid pinning of nanorods and nanoparticles in YBa2Cu3O7-x film
*Kenta Torigoe1, Tomoya Horide1, Kaname Matsumoto1, Ryusuke Kita2, Satoshi Awaji3
Kyushu Institute of Technology, Japan1
Shizuoka University2
Tohoku University3
WBP7-411:00–13:00
Enhanced pinning properties by refining Gd2O3 particles trapped in the GdBa2Cu3O7-δ films via RCE-DR
*Insung Park1, Won-Jae Oh1, Jae-Hun Lee2, Seung-Hyun Moon2, Sang-Im Yoo1
Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM),Seoul National University, Seoul, Korea1
Superconductor, Nano & Advanced Materials Corporation (SuNAM Co.) Ltd, Anseong, Korea2
WBP7-511:00–13:00
Effect of post-annealing on the pinning properties of GdBa2Cu3O7-δ coated conductors via RCE-DR
*Won-Jae Oh1, Insung Park1, Jae-Hun Lee2, Seung-Hyun Moon2, Kookchae Chung3, Sang-Im Yoo1
Department of Material Science and Engineering, Research Institute of Advanced Materials (RIAM), Seoul National University, Korea1
Superconductor, Nano & Advanced Materials Corporation (SuNAM Co.) Ltd, Korea2
Department of Functional Nano Materials, Korea Institute of Materials Science, Korea3
WBP7-611:00–13:00
Effect of growth condition on lattice strain of SmBa2Cu3Oy films induced by BaHfO3 nanorods
*Yusuke Ichino1, Shun Sato1, Yuji Tsuchiya1, Yutaka Yoshida1
Department of Electrical Engineering, Nagoya University1
WBP7-711:00–13:00
Improvement of critical current asymmetricity in BaHfO3-doped SmBa2Cu3Oy superconducting films by ion milling etching
*Tomohide Hori1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Department of Electrical Engineering, Nagoya University, Japan1
Coated Conductors
Chairperson: Yoshiyuki Yoshida (AIST)
WBP8-111:00–13:00
Highly reinforced, low magnetic and biaxially textured super high tungsten Ni-W alloy composite substrates used in coated conductors
*Yaotang Ji1, Hongli Suo1, Lin Ma1, Zili Zhang2, Min Liu1, Jin Cui1, Xinyu Wu1, Chenxi Zhang1
Key Laboratory of Advanced Functional Materials, Ministry of Education, College of Materials Science and Engineering, Beijing University of Technology, Pingleyuan, Beijing1
Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China2
WBP8-211:00–13:00
Laser scribing of stacked coated conductors laminated with solder
*Takato Machi1, Akira Ibi1, Takanobu Kiss2, Masataka Iwakuma2, Teruo Izumi1
National Institute of Advanced Industrial Science and Technology1
Kyushu University2
WBP8-311:00–13:00
Fabrication of YBa2Cu3Oy coated conductor by Vapor-Liquid-Solid growth technique using Reel-to-Reel system
*Kento Yasuda1, Tomohiro Ito1, Yuji Tsuchiya1, Yusuke Ichino1, Yutaka Yoshida1
Niigata University1
WBP8-411:00–13:00
Angular dependence of critical current for REBCO coated conductor under various bending strains
*Kazuhiro Hatano1, Hidetoshi Oguro1, Masashi Miura2, Yusuke Ichino3, Yoichi Kamihara4
Tokai University1
Seikei University2
Nagoya University3
Keio University4
WBP8-511:00–13:00
Study on (NdxSr1-x)TiO3 thin film as conductive buffer layer for low-cost REBCO wire
*Seiya Inoue1, Masaki Kabeya1, Keisuke Ota1, Ataru Ichinose2, Toshiya Doi1
Kyoto University1
Central Research Institute of Electric Power Industry2
WBP8-611:00–13:00
Influence of Different Narrowing Methods on Critical Current of 1 mm HTS Tapes
*Mengxin She1, Longbiao Wang1, Zhuyong Li1, Zhuyong Hong1
Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai, China1
WBP8-711:00–13:00
Effect of extra addition of Ba into YBa2Cu3O7-δ coated conductor with BaHfO3
*Shin Yamada1, Ryo Teranishi1, Yukio Sato1, Kenji Kaneko1, Masayoshi Inoue2
Kyushu University, Japan1
Fukuoka Institute Of Technology, Japan2
WBP8-811:00–13:00
Development of artificial cracked RE123-coated conductor for realizing compatibility of critical current improvement and diamagnetism reduction
*Shintetsu Kanazawa1, Yukihiro Kawamura1, Chihiro Sekine1
Muroran Institute of Technology1
Superconducting Joints
Chairperson: Akiyoshi Matsumoto (National Institute for Materials Science)
WBP9-111:00–13:00
Study of hetero junction between RE123 and Bi2223 tapes with JIM method
*Shintetsu Kanazawa1
Muroran Institute of Technology1
WBP9-2
(Withdrawn)
WBP9-311:00–13:00
Superconducting Joints of In Situ PIT and IMD Processed MgB2 Conductors
*Dipak Patel1, Akiyoshi Matsumoto1, Hiroaki Kumakura1, Su-Hun Kim2, Minoru Maeda3, Seyong Choi3, Jung Ho Kim4
National Institute for Materials Science (NIMS), Tsukuba, Ibaraki, Japan1
Dept. of Electrical Engineering, Kyungpook National University, Daegu, Republic of Korea2
Dept. of Electrical Engineering, Kangwon National University, Kangwon, Republic of Korea3
Institute for Superconducting and Electronic Materials, University of Wollongong, North Wollongong, NSW, Australia4
WBP9-411:00–13:00
The development of superconducting joint technologies for MgB2 wires
*Akiyoshi Matsumoto1, Dipak Patel1, Yuka Hara1, Toru Hara1, Hiroaki Kumakura1
National Institute for Materials Science1
WBP9-511:00–13:00
Superconducting Joint Between Ba1-xKxFe2As2 Tapes by Using a Cold-press Technique
*Shota Imai1,2, Shigeyuki Ishida2, Yoshinori Tsuchiya2, Akira Iyo2, Hiroshi Eisaki2, Taichiro Nishio1, Yoshiyuki Yoshida2
Department of Physics, Tokyo University of Science Japan1
National Institute of Advanced Industrial Science and Technology Japan2
WBP9-611:00–13:00
Fabrication of additional deposited layer of GdBa2Cu3O7-δ on coated conductors for joint
*Shotaro Yasuyama1, Tomohiro Miyajima1, Ryo Teranishi1, Yukio Sato1, Kenji Kaneko1, Valery Petrykin2, Sergey Lee2, Satoshi Awaji3, Tatsunori Okada3, Akiyoshi Matsumoto4
Kyushu University, Japan1
SuperOx Japan, Japan2
Tohoku University, Japan3
National Institute For Materials Science, Japan4
